Knitting Ajour Pattern - Free DIY Tutorial
- Knit ajour pattern
- Wide hole pattern rows
- Arched pattern
- Nice things with Ajour
Ajourmuster is another term for lace patterns. Coming from the French, "Ajour" is also translated as "breakthrough" in the sense of a broken surface, indicating the pattern of holes. In this tutorial you will learn elaborate knitted patterns, which are mainly worked with thinner wool.
Lace wool creates beautiful ajour patterns, with which filigree stoles and shawls can be knitted. If hole patterns are used extensively, very thin wool is recommended. Most of the resulting creativity is like gossamer works of art, which are best used when knitted from mohair, cashmere or silk. For the basic technique, you only need to master the knitting of right and left stitches and put envelopes around the needle. For a cloth or a stole, you should still plan a little more time in the beginning. The constant change of envelopes and stitches that need to be knitted together in a certain way is demanding and takes a bit of patience and practice.
Knit ajour pattern
You need this:
- Like a delicate spider web
Cuddly soft, an absolute lightweight and the visual eye-catcher - Lacetücher in lace pattern never go out of style. As a summer cloth, baby blanket or bridal stole you testify to the skill and endurance of the knitter and are actually priceless. The picture shows a double-knit baby blanket knitted from a cashmere-silk wool blend. The neutral lace pattern fits girls and boys and provides a baptism or baby blanket for a good start in life.
The basic terms for knitting hole patterns can be found in the instruction "knitting lace patterns". This creates the filigree holes by knitting an envelope while knitting two stitches, so that the number of stitches is compensated again. The knitting takes place in a coated form or by two stitches are knitted together on the right. With this knowledge can be quickly create a pattern with vertical punched tape, which is an optical eye-catcher worked over a large area.
For this pattern, hit a corresponding number of stitches and knit a few rows of stitches to the right. The sample was knit with twenty stitches. Start after the edge stitch with three stitches on the right. Knit the following two stitches together on the right by knitting into the second stitch on the left needle, then poking through the first stitch and knitting both stitches together as a right stitch. Knit an envelope by passing the thread with the right needle and pulling it forward. Three stitches on the right, so that the end of the first hole pattern strip is reached. Start two stitches on the right and the second hole pattern strip. Knit two stitches on the right side, knit three stitches on the right and the remaining three stitches on the right until the edge stitch.
In the back row knit all the stitches and the envelopes to the left. Knit six stitches on the right in the next row. Then work one envelope and knit the two following stitches on the right side (to do this, lift the first stitch as if to the right knit, knit the second stitch on the right and pull the stitched stitch over the knitted stitch). Knit two stitches on the right, knit another three stitches on the right for the second hole pattern, then knit two stitches on the right again. The last three stitches of the row also work to the right.
Knit the back row left again. In this way always repeat the rows. The holes appear to the right and left of the middle mesh in staggered form.
Wide hole pattern rows
In the following example, the hole pattern rows are processed in width. Suggest twenty-four stitches for it. The first rows knit at the crotch on the right, which means that every stitch in each row is knit on the right. The first pattern row starts with two left stitches. This is followed by five right stiches, two stitches knit together to the right, one stitch, one st, two left stitches (these form the middle of the pattern), one cover, one stitch on the right, knit two stitches, five stitches on the right and two left stitches.
In the back row knit the stitches as they appear.
Start in the third row with four stitches on the right, knit two stitches on the right, one stitch on the right, one piece, one stitch on the right, two stitches on the left for the middle, one stitch on the right, one piece, one stitch on the right, knit two stitches, four pieces Mesh on the right and two stitches on the left. The back row again as appearing to work.
In this way the envelope with the two knitted stitches in each row of stitches is shifted one stitch outwards until row eleven starts and ends with the two knitted stitches. After the twelfth row, the pattern set begins again. Several perforated strips placed side by side form a beautiful large-scale pattern.
Hole patterns can be visually designed by the knitted stitches. The decreases can be made directly next to the envelopes or multiple stitches removed. The different delivery points influence the optical direction of movement of the stitches. In this way, straight mesh images or even arched patterns can be created. In this example, the knitting of three stitches creates a distinctive median strip.
You will need seventeen troubled stitches and begin with the edge stitch with two left stitches. Follow this with an envelope, four right stitches, three stitches together (to do so, lift off one stitch as for left knit, knit the following two stitches together on the right and pull the lifted stitch over them). Now knit four stitches to the right, one turn-up and two left-hand stitches. In the back row knit all the stitch as they appear. The three knitted stitches are knitted as a left stitch.
In the third row, the envelopes are shifted inwards by one stitch. To do this you start with a stitch on the right, followed by an envelope, three stitches on the right, knit again three stitches, three stitches on the right, one turn-up, one stitch on the right and two left-hand stitches. In the back row, knit again all the stitches as they appear.
In the following rows, move the envelope one point at a time to the middle. In row nine this is then directly left and right next to the three middle stitches.
Always repeat this rapport.
Through the pattern, the edge of the knitted fabric forms a curve that creates additional visual effect.
Nice things with Ajour
The lace pattern scarf impresses with a regular pattern, reminiscent of a leaf shape. It is also perfect for lightweight pullovers, tops or shawls.
This pattern was knitted from a cashmere-silk wool blend and consists of elaborate lace pattern stripes. The finer the wool used, the lighter and airier the finished fabric will look.
Thin cotton gives large-area patterns a slightly rustic touch and is perfect for custom pillowcases.
Tip: Start knitting Ajour patterns with small patterns that repeat regularly. When these knitting patterns have become routine, even the large-scale pattern reports are easy to handle.
Now you can knit the ajour pattern in various ways and create elegant, but also rustic knits.