Clean sticky rubberized handles and surfaces | manual
- Sticky rubberized handles
- Clean sticky rubberized handles
- Vinegar | manual
- Dishwashing liquid | manual
- Toothpaste | manual
- Soda manual
- Nail Cleaner | manual
- Baby powder | manual
- Yoga Mat Spray | manual
Many household and consumer electronics items have rubber surfaces or handles that are frequently touched. Over time you have to accept sticky rubberized handles that feel extremely uncomfortable on your own skin. Fortunately, the rubber can be easily cleaned, if you know how. If you want to clean the sticky surfaces, instructions and cleaning agents are necessary.
Clean sticky rubberized handles and surfaces. Many people are struggling with this problem because after a long period of use or soiling, the material no longer has the same properties and thus begins to stick. This problem can have many causes, because depending on the type of rubber other ingredients were used, which act differently on external influences.
For this reason, it is important to know what the cause is to fight them accordingly. Based on the cause, a cleaning method is used that prevents the rubber from sticking and being reused. How to do this is explained in this article.
Sticky rubberized handles
If you need to clean sticky rubberized handles and surfaces, you should first check the possible cause. Sticky gum can either go from one day to the other or over a longer period of time, making it easier to identify the cause. If you are wondering what the sticky rubber handles and surfaces created, the following points will help you.
Rubber does not tolerate harsh detergents. Many people use cleansers that are alcoholic or extremely acidic. These can have an extremely aggressive effect on the structure of the rubber and virtually dissolve it, which is the case especially with synthetic rubber . Natural rubber is less vulnerable but should not be exposed to the harsh cleaners. Visible is the use of cleaning agents that are not recommended for this, streaks on the rubber or clearly visible damage.
Age at Kunstgummi
Synthetic rubber becomes stickier over the years of use and loses substance. The reason is a loss of plasticizers that cause the rubber to dissolve more and more. As a result, it gets sticky, which can be increased by various environmental influences . Natural rubber does not have this problem.
Numerous environmental influences can have a negative effect on the structure of the rubber and lead to sticky areas or the entire surface. For example, if you have a bicycle with rubber grips on the handlebars, they may start to stick due to strong sunlight as the material is attacked.
Even temperature differences, high humidity, or chemicals from other items can negatively impact the fabric. An example is formaldehyde, which is often released from furniture and passed on to the rubber, which can lead to problems. Therefore, make sure that your rubber grips and surfaces are not placed too unfavorably.
fats and oils
Just as too-strong cleaners can attack the material, this is the case with oils and fats that might come from your palm, for example. For example, if you use a bottle with rubber parts daily, the material may be attacked. The oil or fat penetrates deep into the rubber and dissolves it from the inside, which at the same time makes it sticky.
Compare the individual causes to see what they are. If the problem has occurred quickly, you should check the last used cleaners for their ingredients. Likewise, sticky rubberized handles and surfaces can quickly occur if, for example, cooking oil runs over them and you do not immediately remove it with water. No matter what the cause, below you will find suitable means and methods that make the rubber no longer sticky.
Tip: If the rubberized handles and surfaces become sticky due to causes such as fruit juices or other substances, they can easily be removed with water. If the rubber is not already permanently damaged, gentle cleaners are ideal for this, especially if they are sugary substances.
Clean sticky rubberized handles
7 suitable cleaning agents
If you want to clean sticky rubberized handles and surfaces, you must use suitable cleaning agents so as not to damage the material. It is important to choose the remedies according to their effect and type of gum.
- natural rubber
- synthetic rubber
Since natural and synthetic rubber have different characteristics in terms of their structure, you should not always use the same cleaning agents. Since the two types of rubber can be used by humans almost in the same way, many assume that the same detergents can be used.
Natural rubber is significantly more sensitive in terms of cleaning, which of course limits the possible resources. For cleaning, therefore, offer some home remedies, as well as cleaners that you can purchase commercially. Below you will find an overview of suitable cleaning agents that you can use for natural and synthetic rubber.
In addition to these you also need the following items:
- microfiber cloths
- Sponges without scouring side
- Towels to dry
- cotton pads
- Plastic cup or bucket
These facilitate the application of the means below. Above all, microfibre cloths are important because they do not damage the rubber, absorb dust and dirt more easily and even act against fats and oils, which are always problematic with this material.
Tip: Be sure to avoid cleaning agents such as nail polish removers containing acetone. Although acetone provides clean rubber at first glance, it suffers from the structure of the material, becomes tacky again, and dissolves more and more after each use, which is not really what you want.
Vinegar | manual
Yes, you can use acetic acid to clean bonded gums, even when it's natural rubber. Soft rubber and silicone, on the other hand, should not be cleaned with vinegar. Use only vinegar essence with a maximum of 25 percent acetic acid.
- Mix 3 parts water and 1 part vinegar essence
- Moisten sponge or cloth
- Apply to rubber
- rub gently
Dishwashing liquid | manual
If the rubber is only slightly glued, the use of detergent is completely sufficient. Prepare a detergent solution from one liter of water and ten milliliters of detergent. Place the handles or items in the lye. Clean them with a sponge or a cloth and then rinse the rubber with clear water. On the other hand, wipe off the gummed surfaces with the lye. Do not forget to dry. In most cases, detergent may be enough.
Tip: In the same way, you can use a gentle detergent to soak sticky rubberized handles. After some time, remove these from the detergent solution, rinse and dry thoroughly to be able to use them again.
Toothpaste | manual
Ordinary toothpaste is a good way to clean sticky rubberized handles and surfaces. Toothpaste is not too aggressive for rubber and can be used with little effort. Especially good toothpaste is suitable for rubber seals . Apply the toothpaste to a toothbrush or cloth and use it to brush off the object. Rinse and dry.
Soda is a classic home remedy that helps even with sticky synthetic rubber . Mix a packet of soda with water. It must be a homogeneous mass, which can be easily applied with a toothbrush or a sponge. The soda mass is applied in the same way as the toothpaste.
Nail Cleaner | manual
Nail cleaners have established themselves as excellent cleaners for rubber handles and surfaces. These cleaners are not used to remove nail polish, but to cleanse natural and artificial nails and equipment such as nail clippers. For this reason, they refrain from aggressive ingredients that could attack the rubber. Nail cleaners are cheap for a price of seven to ten euros for a liter offered and applied in the following way.
- Spray rubber
- wipe sprayed area with cotton pad
- optionally rinse with fresh water
Then the rubber would have to be clean again and no longer stick. Nail cleaners should not be used on natural rubber .
Tip: In addition to a nail cleaner you can also use adhesive remover, which is available in hardware stores, the Internet or in stores. For the selected product, make sure it does not damage rubber surfaces and objects, as the CLEANEXTREME does.
Baby powder | manual
Classic baby powder can be used to clean natural and synthetic rubber. Because it has a gentle cleaning effect, it is great for cleaning sticky rubberized handles and surfaces that are soiled with oils and fats. Baby powder is also very cheap to buy and can be applied in the following way.
- Put baby powder on towel
- rub on surface or place
- let absorb
- wipe off after a while
- do not rinse off necessary
The secret behind baby powder is the talcum contained. This cleans the rubber without attacking it. Since it is a fairly gentle cleaner, you must repeat the procedure several times for particularly sticky surfaces and handles.
Yoga Mat Spray | manual
Yoga has been the rage for some years and more and more mats are being offered for sports. Many mats are made of natural rubber and are cleaned with special sprays that are gentle to the material. You can take advantage of that. The Internet and yoga shops offer mat cleaners that will help you easily clean sticky rubberized handles and surfaces. These are offered for prices of around nine to eleven euros for a pint in the spray bottle and are used in the following way.
- Spray rubber
- allow to act for a few minutes
- Moisten the sponge
- Wipe off the rubber
- rinse under running water
- dry well
There is a yoga mat spray that contains essential oils, which, depending on the intensity, can cause the material to decompose more quickly over time. Instead, use sprays without fragrances to improve the cleansing effect.