Home generalRepaint and repaint non-woven wallpaper - DIY instructions

Repaint and repaint non-woven wallpaper - DIY instructions

general : Repaint and repaint non-woven wallpaper - DIY instructions

content

  • Special features of non-woven wallpaper
  • preparation
  • Paint non-woven wallpaper
  • Uneven spots on the wallpaper
  • Tips for quick readers

Non-woven wallpapers are characterized by their excellent properties and are widely used in modern homes. However, the question arises, which peculiarities you have to consider when painting or stroking. This affects both the selection of color and the process of painting itself. Read this step-by-step guide to understand the specifics and how to proceed in detail.

Be it a new coat or the painting of an already existing paint coat - with a new paint you change the effect of the entire room. Painting is generally done faster than alternative wallpapering and is therefore often used to give the room a new look. Non-woven wallpapers are indeed among the high-quality wall coverings, but this does not mean that they would be easy to paint. Their qualities lie in the simple attachment and removal as well as in the robust design. Therefore, it is important to pay attention to some things when painting, as you will find out in our step-by-step guide.

Special features of non-woven wallpaper

What are the special features of non-woven wallpapers ">

Difficulties also exist with dark wallpaper, as it is harder to achieve good coverage. Patterned wallpaper can also have similar problems. The structure also decides whether the wallpaper can be overpainted or not. For example, an imitation plaster technique is not a problem, but a sublime design can generally result in no painting over.

What should I consider if I want to paint the wallpaper ">

  • Select color: Recommended Latex paint
  • Plastic coated wallpapers are hard to cover
  • difficult to paint uneven wallpaper: exception imitated Verputztechnik
  • the choice of color usually affects the opacity
  • bright wallpapers are easier to paint

What do you need for the coating process with a non-woven wallpaper?

  • suitable wall color
  • optionally primer
  • duct tape
  • paint Roller
  • cover
  • different paintbrushes
  • grates
  • bucket
  • various tools such as screwdrivers for removing sockets and switches

preparation

Step 1:

To ensure that the paint adheres optimally to the substrate, you must first clean the wallpaper. This is all the more important the more uneven the structure is. Wipe the surface with a damp cloth, but make sure the wallpaper does not get too wet. Now let the non-woven wallpaper dry completely before you start painting. In the meantime, you can prepare the room so that splashes of paint are avoided. Specialist retailers also offer special cleaners that are also suitable for non-woven wallpapers.

Tip: If you use detergents, you must provide adequate ventilation in the room. In any case wipe with a damp cloth to leave no residue.

Step 2:

Remove all light and well-moving items from the room. Move furniture away from the wall for maximum freedom of movement. Cover the floor with painter's film to protect the floor. Also, protect any furniture left in the room with covers.

Tip: As an alternative to the painters film, you can also use carpet remnants or newsprint for smaller areas. Painting film is always best when large areas need to be covered. However, the painter's film should not be too thin, otherwise it can tear easily. For example, complain the slide on the sides with a stone or a book you no longer need.

Step 3: Remove any existing baseboards.

Step 4: Remove power sockets and light switches and tape over all locations. Be sure to switch off the fuses in the fuse box before doing any work. Glue off edges and corners so that you can achieve clean transitions when painting.

Paint non-woven wallpaper

The priming

In general, it is recommended to apply a primer first. For this purpose, the corresponding products are offered in the trade, which you must use according to the respective instructions. Generally, the agent is applied to the wall with a roller or brush. Allow the primer to dry thoroughly before continuing.

The painting process

  • Make sure that there is not too much paint on the paint roller. Paint off excess paint.
  • Bring the paint to the wall in the cloister in the cloister. To do this, first apply the paint from top to bottom and from bottom to top on the wall.
  • Then move the scooter from left to right. Do not apply a new color and move across the original direction.

The second coat

The problem with non-woven wallpapers is that they shine through many times through the first layer of paint. This phenomenon is especially common in dark wallpaper. Therefore, it is usually necessary to make a second strike pass. If necessary, even a third pass is required.

Completion

Now remove the tape and the painter's foil. Screw all remote switches and sockets back on.

Problems with painting and swiping and how to fix them:

Uneven spots on the wallpaper

They hung pictures on the wall and now there are holes left by the nails ">

Apply putty

If it is a finished product, then you can skip this step. Otherwise mix the putty according to the instructions on the packaging. Finished products are particularly practical and easy to handle.

  • Now apply the putty with the spatula to the damaged area.

Tip: After drying, the mass contracts, which reduces the volume. Therefore check the result once more after drying.

  • Let the putty dry
  • Loop protruding putty off. You can use either sandpaper or an electric grinder.

Tip: Make sure that a smooth surface is created. If necessary, protruding points can still be sharpened, too low points are difficult to remove after the beginning of the brushing.

The surface is too smooth and the primer does not stick

Paint and primer will not stick to smooth surfaces. Therefore, it may be necessary to roughen the surface. For example, use sandpaper with a grain size of 120. Treat the wallpaper in front of the primer to improve adhesion.

Tip: Since sanding creates dust and dirt on the wallpaper, perform this step before cleaning the non-woven wallpaper.

Tips for quick readers

  • not every wallpaper can be painted over
  • Latex paint well suited
  • Use painter foil and adhesive tape
  • Remove sockets and light switch
  • Use primer
  • work in the cloister
  • often at least two strokes necessary
  • not always a comprehensive result can be achieved
  • the wall must be smooth before painting
  • Fill holes with putty
  • Sand down to smooth wallpaper
$config[ads_kvadrat] not found
Category:
Make a crocheted hat - instructions + crochet pattern for a hat
Make hand puppets yourself - making dolls / animals out of socks